Roof RST - 8x6 clearance 4,2m (TAF)

Gable roof from standart truss pieces. Stage size 8x6m

Not Available For Sale

    This combination does not exist.

    Technical Specification 

    Using standard FT34 truss line to built safe and secure roof system is a big advantage for many smaller scale events. 
    This roof can accommodate stage size of 8 x 6 m. Its clearance is 4,2m. The gable roof can be installed both with the top cover from PVC only or including the standard side canopies as well.
    The top canopy support system is created by four 50 x 2 mm single tubes per side of the roof perfectly spaced 1,27 m apart form each other. These are securely hooked to the main support grid of the roof by side slim clamps 8037. 

    The horizontal beams are able to carry 55 kg/m, which makes the max. loading capacity of the roof 1903 kg. The operational wind limit for using the roof system with the side canopies on all three sides is 15 m/s (33 mph).
    Specifications ROOF RST 8x6


    Max. dimensions

    9x6,5 m

    Max. stage size

    8x6 m

    Max. clearance

    4,22 m

    Max. height

    6,22 m

    Max. load bearing capacity

    1903 kg

    Total weight of construction

    652 kg


    Max.Load Bearing Capacity

    1903 kg

    Front Horizontal Beam

    55 kg/m

    Rear Horizontal Beam

    55 kg/m

    Side Horizontal Beams 

    55 kg/m


    TAF Assembly Manual RST 8x6

    TAF Truss Manual EN-CZ

    TAF Roof Component Dimensional Layout RST 8x6


    Stage size

    8000x6000 mm

    Inside width


    8420 mm

    Overall width


    9000 mm

    Inside depth


    5920 mm

    Owerall depth


    6500 mm



    4220 mm



    6220 mm

    Used Truss

    FT34 truss line standard products are mainly used for assembly of RST roofs. It is a box truss with 290 x 290 mm (12 in x 12 in) outside dimensions, main pipe Ø 50 x 2 mm (2 in x 0.08 in), braces Ø 20 x 2 mm (0.8 in x 0.08 in). The alloy used as material for the pipes is EN AW-6082 T6.


    Wind Management

    Wind resistence is calculated with 3 side mesh canopies applied to the structure (2 side canopies and one rear canopy). The three roof walls carrying canopies must be secured by guy wire cross bracing at all times with min. loading capacity 1000 kg (2205 lb).

    In service max. windspeed - 15 m/s - 54 km/h - 33 mph

    Out of service max. windspeed - 28 m/s - 101 km/h - 62 mph



    Option 1 - 800 kg / 1764 lb ballast underneath each tower base = total of 3200 kg / 7055 lb

    Option 2 - 800 kg / 1764 lb ballasts in the 3.5 m (11.5 ft) range from each tower leg attached to the structure by guy wires following the layout in static calculation.


    Canopy and Side Walls

    Top canopy is available standardly in silver grey and black color. The material used is SIO-LINE B 8000 with weight of 630 g/m2.

    The side walls are covered by air permeable mesh canopies in black.


    Transportation Data

    Total weight: ca. 700 kg (1543 lb)

    Transport volume: ca. 7 m3 / 247 cu ft (max. length 2.5 m / 8.2 ft)

    All truss segments are packed in brown carton boxes for better handling and protection during transport.