Roof RSTS - 8x6 (TAF)

Sloping roof system from stage size 8x6m

Not Available For Sale

    This combination does not exist.

    Technical Specification 

    This roof system is unique in its design as the top of the roof is not a gable formed but slant or pitched with 10° angle helping to manage rainwater disposal. It can be assembled mostly from the standard HT34 trussing line segments. This roof can accommodate stage size of  8 m x 6 m (26.3 ft x 19.7 ft). Its clearance at the front is 5 m (16.4 ft) and at the back 3.7 m (12.1 ft). The gable roof can be installed both with the top cover from PVC only or including the standard side canopies as well. 

     The top canopy support system is created by one HT34 cross beam and two HT32 ladder trusses interconnected by six single pipes 50 mm x 2 mm (2 in x 0.08 in) in specific manner to increase the top surface stability. The HT32 ladder beams are securely connected to the main grid by clamps.

     Given the specific pitched design of the roof, the load distribution on individual beams varies. For the front horizontal beam is max. distributed load 60 kg/m (40 lbs/ft), for the rear horizontal beam 140 kg/m (94 lb/ft) and  for the central front to back beam it is 100 kg/m (67 lbs/ft). In additon to that the roof is able to carry 2 x 400 kg (2 lbs x 882 lbs) of sound equipment on the front beam edges. Consequently the max. loading capacity of the roof amounts up to 3100 kg (6,834 lb). The operational wind limit for using the roof system with the side canopies on all three sides is 15 m/s (33 mph).  

    Specifications ROOF RSTS 8x6


    Max. dimensions

    9x7,5 m

    Max. stage size

    8x6 m

    Max. clearance

    5 m

    Max. height

    5,3 m

    Max. load bearing capacity

    3100 kg

    Total weight of construction

    800 kg


    Max.Load Bearing Capacity

    3100 kg

    Front Horizontal Beam

    60 kg/m

    Rear Horizontal Beam

    140 kg/m

    Side Horizontal Beams 

    100 kg/m

    Cantilever Sides

    400 kg


    TAF Assembly Manual RSTS 8x6

    TAF Truss Manual EN-CZ

    TAF Roof Component Dimensional Layout RSTS 8x6


    Stage size

    8000x6000 mm

    Inside width


    8420 mm

    Overall width


    9000 mm

    Inside depth


    6213 mm

    Owerall depth


    6793 mm

    Clearance front


    5029 mm

    Clearance back


    3731 mm



    5304 mm

    Used Truss

    HT34 box truss and HT32 ladder truss standard products are mainly used for assembly of RSTS 8 x 6 m roof. These are the truss lines with 290 x 290 mm (12 in x 12 in) outside dimensions, main pipe Ø 50 x 3 mm (2 in x 0.12 in), braces Ø 20 x 2 mm (0.8 in x 0.08 in). The alloy used as material for the pipes is EN AW-6082 T6.


    Wind Management

    Wind resistence is calculated with 3 side mesh canopies applied to the structure (2 side canopies and one rear canopy). The three roof walls carrying canopies must be secured by guy wire cross bracing at all times with min. loading capacity 750 kg (1654 lb).

    In service max. windspeed - 15 m/s - 54 km/h - 33 mph

    Out of service max. windspeed - 28 m/s - 101 km/h - 62 mph



    1500 kg / 3307 lb ballast underneath each tower base = total of 6000 kg / 13 228 lb must be applied for secure usage of this roof system


    Canopy and Side Walls

    Top canopy is available standardly in silver grey and black color. The material used is SIO-LINE B 8000 with weight of 630 g/m2.

    The side walls are covered by air permeable mesh canopies in black.


    Transportation Data

    Total weight: ca. 800 kg (1764 lb)

    Transport volume: ca. 7 m3 / 247 cu ft (max. length 3.5 m / 11.5 ft)

    All truss segments are packed in brown carton boxes for better handling and protection during transport.